Is Murdock tap water safe to drink?
The short answer for Murdock
Murdock tap water has 4 contaminants above EPA guidelines, including PFBS at 2.2× the limit (tested November 2023). See the full compound-by-compound breakdown and filter recommendations.
The health risk for Murdock
- PFBS, PFOA, PFOS, PFPeA above limit.
PFBS (a PFAS 'forever chemical') was detected above EPA limits. These filters are independently certified to reduce common drinking-water contaminants.
Here's what actually removes PFAS from your water
The right filter eliminates PFAS at the tap. But not all filters do - and the type you choose matters for your home.
Common pitchers like Brita do not remove PFAS. You need a filter independently certified to NSF P473 (for pitcher filters) or NSF/ANSI 58 (for reverse osmosis systems). All three options below carry the relevant certification.
| Compound | Measurement | EPA Limit | Comparison |
|---|---|---|---|
| PFBS Tested: November 2023 · Consecutive Connection |
0.007 µg/L | 0.003 µg/L | 123% above limit |
| PFPeA Tested: November 2023 · Consecutive Connection |
0.005 µg/L | 0.003 µg/L | 80% above limit |
| PFOA Tested: November 2023 · Consecutive Connection |
0.005 µg/L | 0.004 µg/L | 30% above limit |
| PFOS Tested: November 2023 · Consecutive Connection |
0.004 µg/L | 0.004 µg/L | 7% above limit |
View all tested compounds
Consecutive Connection · Tested: November 2023
| Compound | Measurement | EPA Limit | Comparison |
|---|---|---|---|
| PFBS | 0.007 µg/L | 0.003 µg/L | 123% above limit |
| PFPeA | 0.005 µg/L | 0.003 µg/L | 80% above limit |
| PFOA | 0.005 µg/L | 0.004 µg/L | 30% above limit |
| PFOS | 0.004 µg/L | 0.004 µg/L | 7% above limit |
| PFBA | 0.010 µg/L | 6 µg/L | 0.2% of limit |
| PFHxA | 0.004 µg/L | 3 µg/L | 0.1% of limit |
| lithium | <9.000 µg/L | 10 µg/L | Below limit |
| PFHxS | <0.003 µg/L | 0.004 µg/L | Below limit |
| HFPO-DA | <0.005 µg/L | 0.01 µg/L | Below limit |
| PFNA | <0.004 µg/L | 0.01 µg/L | Below limit |
| 11Cl-PF3OUdS | <0.005 µg/L | 0.005 µg/L | Below limit |
| 4:2 FTS | <0.003 µg/L | 0.003 µg/L | Below limit |
| 6:2 FTS | <0.005 µg/L | 0.005 µg/L | Below limit |
| 8:2 FTS | <0.005 µg/L | 0.005 µg/L | Below limit |
| 9Cl-PF3ONS | <0.002 µg/L | 0.002 µg/L | Below limit |
| ADONA | <0.003 µg/L | 0.003 µg/L | Below limit |
| PFDA | <0.003 µg/L | 0.003 µg/L | Below limit |
| PFDoA | <0.003 µg/L | 0.003 µg/L | Below limit |
| PFHpA | <0.003 µg/L | 0.003 µg/L | Below limit |
| PFHpS | <0.003 µg/L | 0.003 µg/L | Below limit |
| PFTrDA | <0.007 µg/L | 0.007 µg/L | Below limit |
| PFUnA | <0.002 µg/L | 0.002 µg/L | Below limit |
Punta Gorda Heights Htrn · Tested: Multiple dates
| Compound | Measurement | EPA Limit | Comparison |
|---|---|---|---|
| Alkalinity, total | 250.000 mg/L | — | — |
| Aluminum | 39.800 µg/L | — | — |
| Calcium | 100.000 mg/L | — | — |
| Chloride | 279.000 mg/L | — | — |
| Fluoride | 0.350 mg/L | — | — |
| Iron | 115.000 µg/L | — | — |
| Magnesium | 33.300 mg/L | — | — |
| Manganese | 6.760 µg/L | — | — |
| Potassium | 4.550 mg/L | — | — |
| Purge Volume | 477.400 gal | — | — |
| Silica | 25.600 mg/L | — | — |
| Sodium | 113.000 mg/L | — | — |
| Strontium | 2600.000 µg/L | — | — |
| Sulfate | 37.000 mg/L | — | — |
| Total dissolved solids | 706.000 mg/L | — | — |
Water utilities serving ZIP 33938
Service area boundaries are approximate and based on state filings or modeled estimates. Contact your utility to confirm exact service at a specific address.
- CHARLOTTE COUNTY UTILITIESAction advised
- Punta Gorda Heights Htrn (WQP)No recent federal sampling
Frequently Asked Questions about ZIP 33938 Tap Water
What contaminants are above EPA limits in ZIP 33938?
ZIP 33938 has 4 contaminants above EPA health guidelines in the latest available data, including PFBS at 2.2x the EPA guideline. The full table on this page lists every tested compound and its measured level.
Will boiling ZIP 33938 tap water remove PFBS?
No. Boiling does not remove PFAS, and the compounds can actually become more concentrated as water evaporates. To reduce PFAS at home, use a filter independently certified to NSF/ANSI P473 (activated-carbon pitcher or under-sink) or NSF/ANSI 58 (reverse osmosis).
Do basic pitcher filters remove PFBS?
Most basic pitcher filters are only certified to NSF/ANSI 42 or 53, which do not cover PFAS. Look for a filter independently certified to NSF/ANSI P473 (activated-carbon pitcher or under-sink) or NSF/ANSI 58 (reverse osmosis) on the spec sheet.
Who provides tap water in ZIP 33938?
Public records identify CHARLOTTE COUNTY UTILITIES as a primary water system associated with ZIP 33938. Service boundaries can vary by address, so confirm exact service with the utility.
When was ZIP 33938 tap water last tested?
The most recent test date used in this report is November 2023. EnviroClarity last refreshed this page on 2026-05-05.
Where can I find the official water quality report for ZIP 33938?
Every U.S. public water system is required to publish an annual Consumer Confidence Report (CCR). Contact CHARLOTTE COUNTY UTILITIES or visit their website for the latest official report covering ZIP 33938. The EPA also maintains a national CCR locator.
Check another ZIP code
Nearby ZIP reports
- 33980 - Charlotte Harbor tap water report
- 33950 - Solana, Punta Gorda tap water report
- 33951 - Punta Gorda tap water report
- 33982 - Cleveland tap water report
- 33955 - Burnt Store Marina, Punta Gorda tap water report
- 33983 - Harbour Heights tap water report
- 33952 - Port Charlotte CCD, Port Charlotte tap water report
- 33949 - Port Charlotte tap water report
Data reflects publicly reported utility records from EPA datasets and local utility disclosures. This information is educational and not medical advice.